Velodyne Acoustics VRP Series User Manual

Page 4

Advertising
background image

Congr atulations

1

.

w w w . v e l o d y n e . c o m

VRP User’s Manual

Congratulations on your purchase of a Velodyne Rear Port (VRP™) subwoofer system. This
system represents the state-of-the-art in home audio reproduction and will provide you with
years of listening pleasure when properly cared for. Read and follow this instruction manual to
insure safe and proper system connection and operation.

Caution!
Please observe the following instructions to insure safe and proper system operation.

Note: Do not leave unit in direct sunlight or use in high humidity environments!!!

Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid
electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all
warnings on the equipment itself. There are no user serviceable parts inside. Please refer all
service questions to your authorized Velodyne dealer.

P r i o r t o I n s t a l l a t i o n :

Please unpack the system carefully. This unit is heavy. Use caution when lifting or moving to
avoid injury. Remove all staples used to seal the carton as they can scratch the cabinet. Please
save the carton and all packaging materials for future use. Packing this unit in any other carton
may result in severe damage when shipping. Record the serial number in the space provided
on page 13 for future reference.

P r o d u c t F e a t u r e s

• A single driver consisting of either:

- 10” (8.2” piston diameter) subwoofer with 2.0” high-temp voice coil

and 40 ounce motor structure or,

- 12” (9.7” piston diameter) subwoofer with 2.0” high-temp voice coil

and 40 ounce motor structure

• Adjustable (50 to 200 Hz) low-pass crossover with a 12 dB/octave slope
• Line-level (RCA) inputs
• Speaker-level inputs and outputs with spring loaded terminals
• Signal sensing auto turn on/off
• Variable volume control
• Selectable phase control (0° or 180°)
• Green power on/ Red power standby mode indicator LED

P r e p a r e f o r I n s t a l l a t i o n

Your new Velodyne subwoofer provides for a number of installation options. Read all the
installation information below in order to determine which installation option is best for your
system. Remember to perform all installation procedures with system power turned off
to prevent possible damage.

Advertising