Velodyne Acoustics VRP Series User Manual

Page 7

Advertising
background image

4

.

w w w . v e l o d y n e . c o m

VRP User’s Manual

P h a s e A d j u s t m e n t - 0 ° / 1 8 0

°

This control allows you to “reverse” the phase of the subwoofer’s output signal 180° to correct
for any possible mismatch and resulting cancellation between the subwoofer and your main
speakers/amplifier. To adjust, simply listen to the system with music playing, then depress the
phase switch from one position to the other and listen for a change in low frequency output.
The correct position will have a greater amount of apparent low frequency output.

For all installations, experiment with the phase switch to determine the setting (0 or 180
degrees) that produces the most bass. If the settings sound similar, we recommend the
“0” position.

A u t o Tu r n o n F u n c t i o n

The subwoofer will turn itself on automatically when an audio signal is present. If no signal is
present for approximately eight minutes, the unit will switch to standby mode (Red LED). While
in standby mode, your subwoofer will draw very minimal power.

Advertising