Verbatim MediaStation Network Multimedia Hard Drive - Manual (Page 13)

13
③ Component: Y, Pb, Pr component cable (not supplied)
Red (Pr) Red (Pr) Connect Pr Jack of TV
Blue (Pb) Blue (Pb) Connect Pb Jack of TV
Green (Y) Green (Y) Connect Y Jack of TV
① Composite: Yellow RCA cable. (Supplied)
Yellow (CVBS) Yellow (CVBS)
Connect to Composite
(CVBS) Jack of TV
② S-Video: Black rounded cable (not supplied)
S-VIDEO Connect S-Video Jack of TV
3. Use as Multimedia Player
3.1 Connect to External AV Device
3.1.1 Connect Video Cable
MEDIASTATION supports 3 type of video output; “Composite, S-video, Component”. Use video connection that your TV supports. Normally,
TV supports composite video connection, and this package is supplied with a composite video cable.
✓ When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual.
2. “MG-35S” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output signal is changed.
3. After you see normal screen, you have to save video confi gurations of MEDIASTATION .See “3.2.1 Video Setup”.