Vision Fitness T9450 - Manual (Page 5)

5
1
STEP
1
STEP
• Slide on the right and left console
mast covers from the bottom of the
console masts
• Using the wire tie as a guide, slide
the data cables (One small and one
large) up from the bottom of the right
console mast. Make sure the data
cables run through the slot located at
the front of the right console mast.
• Put the console mast into the
console mast bracket. Be sure not to
pinch the data cables
• Secure the console mast to the
bracket with 4 bolts (M8x20L); 2 bolts
on each side. Tighten with the
enclosed 5mm Allen wrench
• Repeat on the left side
NOTE: There are no data cables on
the left side.
ORANGE BAG
2
STEP
2
STEP
• Slide the left and right console mast
covers over the console mast brackets.
• Fold the treadmill
• Attach the right side cover using the
Flathead pointed screws for the rear
of the cover and the Flathead screws
for the front of the cover.
• Repeat this step on the left side.
• Unfold the treadmill
BLUE BAG