Varec Driver Entry Terminal 8620 - Manual (Page 24)

Configuration
16 Installation and Operations Manual
4.1 Configuring the DET.Config File
The DET.Config file is found on the “Local Drive” directory in the Single Board Computer. The
values are edited to configure the DET.
Note Be aware that making direct edits to the DET.Config file can result in improper
system behavior if not done in accordance with proper XML syntax.
In NotePad, modify the DET.Config file by replacing the necessary variables as shown in the
following example (see Table 4-2 below for more information about the variables used in the
config file):
Example:
<configuration Title=”VarecDET” HostInterfaceType=”Network”
TouchScreen=”False” Watchdog=”False”>
<HostSerialInterface Name=”COM2:” BaudRate=”9600” Parity=”none” DataBits=”8”
StopBits=”one” Address=”1” />
<HostNetworkInterface Port=”4096” />