VIPowER VPM-6248T - Manual (Page 16)

VPM-6248T USER MANUAL 16
3. Driver Installation
After completing the hardware installation, refer to the following
driver installation instructions for the operating system you are
using.
3-1 Windows 98SE
If this is the first time using your VPM-6248T USB 2.0 External
Enclosure, you must first run the [SETUP.EXE] from the USB 2.
0 “Drivers and Utility Installation” CD after connecting it to your
computer. Then proceed with the following:
Step 1.
Connect your VPM-6248T External Enclosure to an available USB
port on your computer.
Step 2.
An “Add New Hardware Wizard” screen will appear.
Click [Next].