VIPowER VPM-6248T - Manual (Page 5)

VPM-6248T USER MANUAL 5
• Supports USB 2.0 transfer rates up to 480 Mbps. (Your
system must have USB 2.0 host port(s) and USB 2.0 driver
installed for the VPM-6248T to perform at USB high speed)
• USB 2.0/IDE compliant
• Integrated USB transceiver
• High-speed (480 Mbps) and full speed (12 Mbps) support
• USB suspend/resume, remote wake up support
• Supports ATA PIO modes 0-4: ATA interface operation mode
is automatically selected during device initialization or manu-
ally programmed with configuration data
• Supports Ultra DMA modes 0-4
• Supports 48-bit LBA (large HDD), when the VPM-6248T
connects with one 3.5” HDD installed in the mobileRACK
• Power and drive activity LEDs
• Drive enclosure made of metal to aide in heat dissipation
• Built-in cooling fan
• Adjustable temperature control sensor to reduce fan noise
• Works with USB-equipped PC, Notebook and Mac
computers
MobileRACK
• Enables portable use of 3.5-inch hard disk, MO, TR-4 tape,
zip and other IDE and ATAPI devices
• Convenient pull-out handle
• Safety latch-lock feature
• LED indicators for power and drive activity
• Includes MobileRACK docking case and drive tray
Operating Systems
• Windows Me/2000/XP – no drivers required
(software drivers for Windows 98SE included)
• Mac OS 9.0 or later (software drivers included)