Vidikron Vision Model 85 - Manual (Page 45)

Installation
Vidikron Vision 85 Owner’s Operating Manual 33
PRE
L
IMINAR
Y
Connecting a PC or
Automation System to the
VHD Controller Use a straight-through, 9-pin RS-232 cable to connect a PC or home theater
control/automation system (if present) to the RS-232 Control port on the VHD Controller; see
Figure 3-15.
For more information about using this connection, refer to Serial Communications on
page 67.
Figure 3-15. RS-232 Control System Connection
Pb Pr Y
Video
3 IR
RS-232 Control
S-Video 1
S-Video 2
1 2
TRIGGERS
RS-232 Out Component Video
1 2 3 4 5
7 8 9 6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)