Vision Fitness X1500 - Manual (Page 6)

6
2
STEP
Pedal Arm
Cover
Pedal Arm
Knuckle
Joint
Rotation
Axle
2
STEP
• Slide a wavy washer (25x34x2T) on
to the right rotation axle. Slide the
knuckle joint of the pedal arm onto the
right rotation axle. The pedal arm roller
wheel should be placed into the groove
of the guide rail. Secure the pedal arm
to the rotation axle with a washer
(8x38x2T) and screw (M8x20L).
Tighten with the 5mm T-shaped wrench.
• Place the pedal arm cover over the
knuckle joint. Secure in place with a
washer (4x10x1T) and screw
(M4x12L). Tighten with the screwdriver.
• Repeat both steps on the left side.
BLUE BAG