VIORE PLC7V96 - Manual (Page 21)

Service & Support
Problem
No signal found
No picture or sound
Encrypted channel message
No response from remote control
Square blocks in picture or picture
freezes
Probable cause
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Under standby mode
It is a pay per view channel
Remote control is not aimed correctly
Front panel obstructed
Remote control batteries inserted incorrectly
Remote control batteries exhausted
Aerial may not be compatable
Aerial is damaged/misaligned
What to do
Check aerial lead
Check aerial
Check with dealer
Select an alternative channel
Aim remote control at front panel
Check for obstructions
Check batteries are inserted correctly
Replace remote control batteries
Check with dealer
Check aerial
20
Press the POWER button
Specifications
ATSC/NTSC
Color TFT-LCD
Air: 2-69 Cable: 2-135
7 inches
2CH
DC IN 12V
15W
220X130X31mm
0.65kg
Video Signal System
Display Device
Receiving Channel
Screen Size
Screen pixels
Audio output
Power Voltage
Power consumption
Size
Weight
Specifications are subject to change without notice.
1440x234 dot