VIORE PLC7V96 - Manual (Page 6)

Introduction
Thank you for purchasing this product which has been designed and manufactured
to give you many years of trouble-free service.
About This User Guide
This user guide contains all the information you need to know about how to setup
and watch available free view channels using your Port able ATSC/NTSC TV.
Accessories In the Box
Remove your Port able ATSC/NTSC TV carefully from the box , and remove the
packaging from each part .
You will find the following items:
Look out for this symbol. It indicates useful and important tips.
If the AC/DC adapter is connected while the TV is powered on, it will supply the unit
with power. Note: the battery will always be recharged while the AC/DC adapter is
connected.
Port able ATSC/NTSC TV
Remote Control (CR2025 battery included)
User Manual
USB adaptor
Magnetic base antenna
Power adaptor
5
Warning: Change or modifications to this unit not expressly by the part responsible for compliance could
void the user 's authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference will
not occur in a particular installation. If this equipment does cause harmful inter ference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
-Consult the dealer or an experienced radio TV technician or help.
Shield cables must be used with this unit to ensure compliance with the Class B FCC limits.
Safety Information