Connections – Venturer PDV28420C User Manual
Page 10
E-9
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Connecting an Antenna for over-the-air Broadcasts
The tuner in this TV receives ATSC TV signals from an antenna - it thus can receive standard (SDTV) and high
definition (HDTV) over the air broadcasts.
Connecting other Devices to the TV ANTENNA Terminal
The tuner in this TV can also receive analog cable signals or the RF output from a satellite receiver, VCR or cable
box.
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
Connecting to a VCR / Camcorder / Satellite System / Cable
Connect the AUDIO and S-VIDEO cable (not included) as shown:
Make sure you connect the cable from the other equipment (AUDIO OUT and S-VIDEO OUT) to this unit AV IN 1
(AUDIO IN and S-VIDEO IN).
NOTE
Please refer to the user manual
for the other equipment for more
information.
To S-VIDEO
OUT / AUDIO
OUT jacks
To S-VIDEO
IN jack
To AUDIO
IN jacks
(AV IN 1)
Satellite, cable or TV
antenna cable to TV
ANTENNA terminal
(cable not included)