Venturer PDV28420C - Manual (Page 7)

CONTROL REFERENCE GUIDE
E-6
REMOTE CONTROL
1. / I (STANDBY / ON) Button
Press to turn ON the unit or put it in STANDBY (OFF)
mode.
2. TV Button
Press to switch to TV mode.
AV Button
Press to switch to source connected to AV 1 / AV 2
(composite) inputs.
HD Button
Press to switch to source connected to YUV
(component) inputs and HDMI 1 / HDMI 2 inputs.
DISPLAY Button
Press to change disc status information displayed
on the screen.
3. Number (0 - 9) Buttons
4. • [dot] Button
Press to enter digital sub-channels. (i.e. 11.3 or
12.7)
5. MENU Button
Press to display the on-screen TV menu.
6. VOLUME (- / +) Buttons
Press to adjust the volume level.
7. CURSOR ( , , , ) Buttons
Press to highlight selections on a menu screen and
adjust certain settings.
ENTER Button
Press to confirm selections on a menu screen.
8. CC Button
Press to activate the Closed Captioning feature.
This function only works on programs broadcasted
with captions.
9. EXIT Button
Press to exit the TV SET UP menu and return
directly to normal viewing.
10. SLEEP Button
Press to set the SLEEP timer. The unit will remain
on for the time that is set, and will automatically
shut off afterwards.
11. FUNCTION Button
Press to switch between TV / AV 1 / AV 2 / YUV in /
PC in / HDMI 1 / HDMI 2.
12. LAST CH Button
Press to switch repeatedly between the last two
channels displayed.
13. MUTE Button
Press to turn off the sound.
14. CH / CH Buttons
Press / to change the channels.
15. MTS Buttom
Press to switch between MONO sound, STEREO
sound and Secondary Audio Program (SAP).
16. PICTURE Button
Press to select from preset screen display settings
to match the type of show you are watching
(Personal / Soft / Movie / Standard / Dynamic).
17. SOUND Button
Press to select from preset sound settings to match
the type of show you are watching (Standard /
Personal / Theater / Voice / Music).
18. FORMAT Button
Press to select the picture format.