Venturer PDV28420C - Manual (Page 5)

E-4
When you turn on your television set for the first
time, be sure to place it on a solid stable surface. To
avoid danger, do not expose the TV to water or a heat
source (e.g. lamp, candle, radiator). Do not obstruct
the ventilation grid at the rear and be sure to leave
sufficient gaps around the unit as shown.
4"
4" 4"
TURNING THE UNIT ON FOR THE FIRST TIME
The first time you turn the unit on, it will go directly to the setup mode. Simply follow the screen prompts as shown
below to tune in the channels.
1. When the screen appears as below, press the ENTER
button to start the wizard.
2. Use the / button to move to different language,
press the ENTER button to select the desired
language.
QUICK INSTALLATION
3. Use the / button to select the tuner mode and
press the ENTER button to confirm.
4. Use the / button to select the scan mode and
press the ENTER button to start scan. The system will
automatically start to scan and preset all available
stations.
5. After scanning has finished, the TV will display the
first station stored.