Vax RS 232C - Manual (Page 22)

Page 22 of 24
8. COMMAND LIST
Function Command Code
Channel fader gain
91H, 03H, <Channel Attribute>, <Channel Number>,
<Value> (position)
93H, 03H, <Channel Attribute>, <Channel Number>,
<Value> (step)
Crosspoint gain 95H, 05H, <Source Channel Attribute>, <Source Channel
Number>, <Destination Channel Attribute>, <Destination
Channel Number>, <Value>
Preset memory
recall F1H, 02H, 00H, <Preset Number>
Channel
ON/OFF 92H, 03H, <Channel Attribute>, <Channel Number>,
<OFF/ON>
Power ON/OFF F4H, 01H, <ON/OFF>
Tone control
(BASS/TREBLE) AAH, 04H, <Channel Attribute>, <Channel Number>,
<Bass/Treble>, <Value>
EQ settings
- ON/OFF setting
- Band No, setting
- Gain setting
- Q setting
- Center frequency
setting
A1H, 07H, <Channel Attribute>, <Channel Number>,
<OFF/ON>,<Band Number>, <Gain Value>, <Q Value>,
<Freq Value>
Loudness
compensation ABH, 03H, <Channel Attribute>, <Channel Number>,
<OFF/ON>
Filter setting
- HPF setting
- LPF setting A2H, 04H, <Channel Attribute>, <Channel Number>,
<HPF/LPF>, <Value>
Input sensitivity
setting ACH, 02H, <Channel Number>, <Value>: (Input channel
only)
Phantom power
setting 87H, 02H, <Channel Number>, <OFF/ON>: (Input channel
only)
Channel name
request F0H, 03H, 40H, <Channel Attribute>, <Channel Number>
[Response code]
C0H, 09H, <Channel Attribute>, <Channel Number>,
<ASCII Data(1byte)>, <ASCII Data(2byte)>, <ASCII
Data(3byte)>,
<ASCII Data(4byte)>, <ASCII Data(5byte)>, <ASCII
Data(6byte)>,
<ASCII Data(7byte)>