Vax RS 232C - Manual (Page 7)

Page 7 of 24
5.1.2 Channel Fader Gain - Step Up/ Step Down
Set the input and output channel gain positions by the number of steps.
Positions can be varied from the current status by the designated number of steps.
One position varies per step.
9000Series Amplifier responds with the same data as that received.
The 9000series Amplifier informs position values changed by Step Up or Down.
93H, 03H, <Channel Attribute>, <Channel Number>, <Step>
<Channel Attribute>
00H: Input channel
01H: Output channel
<Channel Number>
00H - 07H (Input channel 1 – 8)
00H - 07H (Output channel 1 – 8)
<Step>
UP: 41H – 5FH (1 – 31 step up); Example showing 0.5dB Step Up: 41H
Down: 61H - 7FH (1 – 31 step down); Example showing 0.5dB Step Down: 61H
Example showing 0.5dB up of Input Channel 1 fader gain
93H, 03H, 00H, 00H, 41H
See Channel Fader Gain – Step Up / Step Down Table on the next page.