Venturer PVS7980 - Manual (Page 10)

E - 10
Watching Video Equipment
1. Connect the other equipment to the monitor using a standard AV Cable (not included).
2. Turn on the monitor.
3. Turn on the video equipment and follow the instructions provided with it to playback.
Note:
• make sure to use the correct audio/Video cable. Connecting the plugs incorrectly may cause
a weak signal.
• If you have a mono VCr, the volume level from the speakers will be low.
D. Playing a Game System/Video Equipment on the Monitor
you can connect game systems or other video equipment for playback through the monitor only.
you cannot connect these systems to the main unit.
C. Listening to a Stereo Receiver or Amplifier on the Main Unit
The main unit can play two channels Dolby Digital.
Listening on External Audio Equipment
1. Connect the main unit to the left/right audio In jacks on the other equipment using a standard
Audio cable (not included).
2. Turn on the main unit.
3. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO
IN function.
CONNECTIONS
Note:
• make sure to use the correct
Audio cable. Connecting the plugs
incorrectly may cause a weak
signal.
• If you have a stereo VCr, make sure
you set it to stereo mode.
• Due to copyright protection, DVD
movies cannot be copied. If you copy
a DVD movie onto a videotape, the
resulting copy will be unclear, with
poor sound quality. This is NOT
caused by a defective DVD system.
811-798191W012.indd 10 4/1/2008 5:00:58 PM