Venturer PVS7980 - Manual (Page 17)

E - 17
DVD PROGRAMMABLE PLAyBACK
PROGRAMMABLE MEMORy
the two types of programmed playback provided by this unit is title/chapter programmed
playback.
TITLE/CHAPTER PROGRAMMED PLAyBACK (DVD)
1. Press the MEMORy button in PLAy mode.
2. Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For
example : 01 02, 02 05, 02 11) It will move to the next item automatically.
3. Repeat steps 2 to add additional titles and chapters.
4. Press the PLAy button to start the programmed playback.
LANGUAGE SETUP
1. In STOP mode, press the SETUP button.
2. Use the or button to select the option (OSD
Language, Audio, Subtitle or Disc Menu), then
press the button.
3. Use the or button to select your preferred
language, then press the ENTER button to
confirm.
4. Press the button to go back to the previous menu.
Repeat steps 2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the RETURN button.
CUSTOMIZING THE DVD FUNCTION SETTINGS
Note:
• some DVDs may not play in the audio language selected. a prior language may be
programmed on the disc.
• some DVDs may be set to display subtitles in a language other than the one selected.
A prior subtitle language may be programmed on the disc.
• some DVDs allow you to change subtitle selections via the disc menu only. If this is the
case, press the MENU button and choose the appropriate subtitle from the selection on
the disc menu.
• some DVDs may not included your pre-selected language. In this case, the DVD player
automatically displays disc menus consistent with the disc’s initial language setting.
811-798191W012.indd 17 4/1/2008 5:01:00 PM