Large capacity debris bag – Viper Hayward 5500 User Manual
Page 10
9
Use Only Genuine Hayward Replacement Parts.
Large Capacity Debris Bag
Attaching Debris Bag
(Part B, page 4)
1.
Place forward edge of Bag Holder under tab to right of
Vacuum Tube.
2.
With Bag Holder flat on Deck, slide Bag Holder to the left
until it locks in place.
Removing Debris Bag
1.
Push down Locking Tab on Deck.
2.
Slide Bag Holder to right.
Cleaning Debris Bag
1.
Hold Bag over trash can or wherever debris is to
be placed.
2.
Slide Float Closure off of bag
3.
Hold open edges apart and shake debris from bag.
4.
Slide Float Closure onto bag.
Sand (dense debris)
Always empty the Viper bag when sand (or heavy
debris) fills the bag up to the “Empty Sand Line”. The
Viper will continue to operate with 1 cup of sand and the
remainder of its bag filled with debris.
Note: Pools with excessive amounts of sand should be
manually vacuumed before installing the Viper.
Hold Edges Apart
Attaching / Removing Debris Bag
Rear Deck of Cleaner
Slide Float Closure off of Bag
a)
b)
Empty Sand Line
(blue line)
Empty Sand Line
(blue line)