Viper Hayward 5500 - Manual (Page 4)

3 Use Only Genuine Hayward Replacement Parts.
Introduction
Congratulations on your purchase of the Hayward Viper
Automatic Pool Cleaner. The Hayward Viper is designed to
clean your pool faster than other automatic pool cleaners so
you and your family spend your time enjoying your pool, not
maintaining it.
This revolutionary design offers the following features:
• Faster Cleaning
- Wider Vacuum Nozzle
- Powerful Sweep Hose
• Complete Pool Coverage
- Patented AquaDrive™ water jet propulsion
- Randomized Cleaning, Backup & Spin-out
• Large Debris Pick-up
- Larger Suction Inlet
- Three High Pressure Water Jets
• Less Frequent Bag Cleaning
- Larger Capacity Bag
- Easy to remove, clean and replace debris bag
• Less Wear on Pool Surface
- Patented AquaDrive water jet propulsion: no powered
wheels wearing pool surfaces
• Easy Installation
A limited warranty program protects your Hayward Viper
cleaner. To take full advantage of this limited warranty, please
read, complete and return the Limited Warranty
Registration Card within 14 days of purchase date.
Your warranty card is packed in the Owner’s Guide and
Accessory Pack.
Important
This manual is for Viper owners who want to install their
Automatic Pool Cleaner. However, we recommend that an
Authorized Hayward Dealer install the cleaner.
The Hayward 5060 Booster Pump purchased separately as
part of the Viper Automatic Pool Cleaner package offers
optimum cleaner performance. Use of other booster pumps
will provide acceptable performance if they deliver 35 Pounds
per Square Inch (PSI) at 12 Gallons Per Minute (GPM) at the
dedicated line pool wall fitting. For electrical and plumbing
installation procedures for the Hayward Booster Pump, refer
to the Owner's Guide that comes with the Hayward 5060
Booster Pump.
Warning - Risk of Electrical Shock
You should have a licensed electrician install the cleaner’s
booster pump. The Booster Pump must be installed in
accordance with the National Electrical Code and all
local code requirements.
Purchase Date
Serial Number
(located on back of cleaner)
Length of Hose Used
Water Pressure Reading
For Your Records