Tie-line – Vizio EXES-6000 CP-64 User Manual

Page 70

Advertising
background image

EXES-6000, CP-64 Summary of Dial Operations

Tie-line system of 2 or 3 exchanges

Station numbering: No. 200 ~ 455, No. 470 ~ 725, No. 740 ~ 995 (standard)

Tie-line

Classification

Call

Function

Press-to-talk

Remote response

Remote response registration

Continuous calling tone response

Privacy

Secretary transfer

Single digit registration

Single digit dialing

Personal number registration

In/Out annunciation-lamp ON

Personal number cancellation

In/Out annunciation-lamp OFF

Personal number call

Conference

Conference clear

Highest executive priority

Call transfer

Dial operation

Simplex

Duplex

Confirmation tone

Secretary transfer off

Registration dials (maximum 4 digits)

Confirmation tone

Confirmation tone

Calling

Calling

Busy tone

Call conversation

Transfer

Conversation with
original station

Number

Station No.

1000 ~ 1999

Station No., Personal No.,
Single digit number

Station No., Personal No.,

Single digit number

Description

Conversation is simplex when PTT bar is used.

When a station is called by continuous calling

tone, near station in the groups can respond the
call instead of the called station.

Group registration of stations can be made from
each station.

Called party touches one of these keys then

conversation may begin.

When a party does not wish to accept incom-

ming calls, set the Privacy Switch in the ON

position.

This function allows for automatic transfer of
calls to a secretary when desired.

This function allows for single digit registration
of up to 4 digits among the numbers 0 through
9 and the

key.

Registered dial code may be automatically

dialed.

Personal number may be resistered at any
master station which the person to whom the
number is assigned expects to be.

When anyone having a personal number leaves
the office he merely cancels the programming
of his personal number.

A personal number dialing enables the station

call for a person having the personal number.

A conference call may be made with up to 4
persons. Participants must be called individually.

If a person called into a conference is absent,

the conference may be returned to the original
condition.

When the called party is busy, this function
allows interruption of the existing conversation
and immediate direct contact with the called

Party.

The called party can transfer the call to a

selected other station (by station number,
personal number or single digit number).

– 66 –

Advertising