Vizio EXES-6000 CP-64 - Manual (Page 79)

Call Transfer
Tie-line
Call Transfer from Called Station
During the conversation, first dial
(the Station Number of the person the call is to be trans-
ferred to).
The original call is then held and the holding tone is trans-
mitted to the other party, while the third party is called
and asked whether he will accept the call. If he agrees to
accept the call, dial
or hang up a handset
and the transfer will be completed.
This function allows called party to transfer that call to
another station. The party to whom the call is to be trans-
ferred, may be called using either the Station Number, the
Personal Number or through Single Digit Dialing.
Call Hold and Call Back from Calling or Called Station
During the conversation, first dial
the Station Number of the third party.
The other party is then placed on hold as the third party is
called. Upon completion of the conversation with the
third party,
the party called touch dials the
key
or the third party touch dials the
key
or the third party replaces a handset.
This allows the original conversation to resume.
The Transfer function is combined with the Call Holding
function.
When two parties are talking, either one can be temporarily
placed on hold to permit the calling of another station. The
conversation with the third party over, the original conver-
sation can be resumed.
The third party can be called using either the Station Num-
ber, his Personal Number or through Single Digit Dialing.
Called Station
Call
Called Station
Calling Station
Transfered Station Number
Called Station
Call
Holding
Calling Station
Third Party
Transfer
Called Station Called Station Calling Station
Third Party
Call Back
Called Station Third Party Called Station
Third Party
Call
Calling Station
Original Call
Note.
When 2 or 3 exchanges are connected by tie-line, an
original call can be transferred only to the third party
who shares the same exchange with the party who trans-
fers the call.
– 75 –