VIEWSONIC VPW4255 - Manual (Page 16)

proceeding to these steps:
• Choose an appropriate site and install the product on a level table where the stand is secure.
• Install the monitor to have ready access to a power socket available.
• Make sure that the power switch of this device is turned off.
INSTALLATION INSTRUCTIONS (continued)
( 2) Make sure that the dislay signal of the personal computer to be used is compatible wih the secifications of this
device.
( 3 Make sure that the power switch of the personal computer is turned off.
( 4) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
personal computer manufacturer or your local retail dealer.
Connecting to a PC
Monitor rear panel
Power
cord
Power cable
connector
Speaker (R) Speaker (L)
PC
(D-sub) (DVI)
To signal
output
terminal To signal
output
terminal
To audio
output
terminal
3.5mm
Stereo
mini jack
ViewSonic VPW4255 14
Read SAFETY INSTRUCTIONS ( to ) carefully to ensure maximum safety before
(1) Please refer to the ViewSonic website for appropriate PC drivers to run the display at its optimal condition.
(www.ViewSonic.com)
See "Product Specifications" concerning the specifications of this device.
the personal computer may be necessary. For details, refer to the instruction manual of the personal computer or ask the