VIEWSONIC VPW4255 - Manual (Page 24)

Picture
Audio
Timer
Function
Setup
Language
Select
OK Set Function
Screen Saver
Off
Screen Wipe On 60Min.
Black Side Panel Off
Video Power Save Off
Freeze Mode Split
Default Zoom Panoramic
Reset Reset
Select Set Return
OK
MENU
FUNCTION MENU
Function
Panel Life
Normal
Mode Display Off
ID Number 1
Inverse On 60Min.
Standby White Off
Gamma 2.2
Reset Reset
Select Set Return
Selected characters Setup hint
Screen Saver
Off 5Min. 10Min.
60Min. 40Min. 20Min.
This moves the picture around the screen in small amounts, at set
Screen Wipe On 60Min.
Press the MENU or RETURN button on the remote control to return to
normal viewing.
Black Side Panel Off On
This turns the gray sidebars On/Off when watching normal mode
On. It is recommended to set to Off to reduce the panel image
retention.
Video Power Save
Freeze Mode
Default Zoom
Reset (waiting to reset)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Panel Life
Normal Extend 1 Extend 2
This function is to suppress the contrast of the screen regardless of
the Contrast setting in the Picture Menu. By this control, power
consumption can be reduced or degradation of a panel can be
mitigated. The order of power consumption is Extend 2 < Extend 1 <
Normal.
If the Contrast setting is changed when this item is set to Extend 1 or
2, it will be changed to Normal automatically.
Mode Display Off On
This can display the Input Signal Screen Display every time the input
mode and signal mode are changed.
Set to OFF if the Input Signal Screen Display is not needed when
switching signals.
ID Number
1 2 3 4
7 6 5
Assigns ID nos. to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).
Inverse On 60Min.
This function can change each level of RGB signal invert to reduce
Standby White
Off 15Min. 30Min.
120Min. 60Min. monitor enters power save mode, and it will continue for the period of
Gamma 2.2 2.8 Normally set to 2.2.
OPERATING INSTRUCTIONS (continued)
ViewSonic VPW4255 22
intervals, to reduce the panel image retention. This prevents
stationary objects, such as screen logos, from leaving a slight image
visible after they should have disappeared.
Select On (continuous operation) or 60 Min. (time limit operation)
and press the OK button.
screen size area. It is always set to Off when the monitor is powered
(Exit the function)
the panel image retention. When this function is required,
select On (continuous operation) or 60Min. (time limit operation) and
press the OK button. Press the Menu or Return button to exit.
This function is also provided to prevent image retention. If time is
set for this item, the screen changes to the white pattern when the
the setting time.
(grayed out-not available)
(grayed out-not available)
(grayed out-not available)