Volvo XC90 - Manual (Page 223)

09 Maintenance and servicing
Replacing bulbs 09
``
* Option/accessory, for more information, see Introduction. 223
When replacing bulbs, keep the following
points in mind:
• Never touch the glass of bulbs with your
fingers. Grease and oils from your fingers
vaporize in the heat and will leave a deposit
on the reflector, which will damage it.
• The optional Active Bending Light bulbs
contain trace amounts of mercury. These
bulbs should always be disposed of by an
authorized Volvo retailer.
The following bulbs should only be replaced by
a trained and qualified Volvo service techni-
cian:
• Active Bending Lights
• Courtesy (dome) lighting
• Reading lights
• Glove compartment lights
• Turn signals and courtesy lights in the side
door mirrors
• High-mounted brake lights
Replacing high/low beams/turn signal/
parking light bulbs
WARNING
• The engine should not be running when
changing bulbs.
• If the engine has been running just prior
to replacing bulbs in the headlight hous-
ing, please keep in mind that compo-
nents in the engine compartment will be
hot.
G027081
The entire lamp housing must be lifted out
when replacing these bulbs.
To lift out the lamp housing:
1. Switch off the ignition.
2. Open the hood.
3. Pull up the retaining pins (see the illustra-
tion).
4. Lift out the lamp housing.
G027083
WARNING
Active Bending Lights* - due to the high
voltage used by these headlights, these
bulbs should only be replaced by a trained
and qualified Volvo service technician.