Vantec UGT-IS100R - Manual (Page 9)

UGT-IS100R
Page 9
7. When asked
Created RAID on the select HDD (Y/N)?,
press
Y to accept.
8. At the next screen select Save And Exit Setup, press
Enter. When asked Save to disk &Exit (Y/N)?, press Y to
exit the BIOS.
CONCATENATION (JBOD)
1. As the BIOS boots press
Ctrl+J when prompted to enter the
RAID BIOS.
2. At the next screen select Create RAID Disk Drive, press
Enter.
3. Enter RAID name, press
Enter.
4. Please use arrow keys ↑ and ↓to switch the RAID level to
JBOD-Concatenate, then press Enter.
5. Please use arrow keys ↑ and ↓to switch the disk, use the
“space” key to mark the selected disk, then press
Enter.
6. Input the RAID size, press
Enter.
7. When asked
Created RAID on the select HDD (Y/N)?,
press
Y to accept.
8. At the next screen select Save And Exit Setup, press
Enter. When asked Save to disk &Exit (Y/N)?, press Y to