Vision Fitness R2100 - Manual (Page 5)

5
1
STEP
2
STEP
1
STEP
• Slide the rear foot in place and
attach, using the 5
MM L-Shaped wrench,
two screws (M8 x 20L), two screws
(M8 x 65L), and four lock washers
(M8).
• Slide the rubber sleeve to the proper
position at the bottom of the joint.
ORANGE BAG
2
STEP
• Place the seat bracket on the seat
frame. With the 6
MM Allen wrench
secure the seat bracket with the four
Cap Screws (M8 x 20L).
• Loosen and take off the screw on
the seat lever with the 4
MM L-shaped
wrench. Turn the seat lever so the
screw holes line-up and reinstall the
screw with the 4
MM L-shaped wrench
to secure the seat lever.
• Place the seat handlebar into the
proper position on the seat frame.
With the 5
MM Allen wrench secure the
seat handle bar with four screw
(M8 x 15L) and four lock washers
(M8).
• Secure the seat cushion and seat
back to the seat frame by inserting the
eight screws (M6 x 55L) and eight
lock washers (M6). Tighten with the
4
MM L-shaped wrench.
BLUE BAG