Vizio XMF1000 - Manual (Page 14)

5. Remove the bar, the leveler, and the unattached bracket ( part A)
from the wall.
Allow the attached bracket to swing down.
Using the power drill and the 1/2” concrete drill bit, drill into the
3 pencil marks as shown. Drill each hole about 2 1/2” deep.
6. Remove 3 anchors from the pouch labeled ANCHOR.
Push the anchors into the holes you just drilled. Ensure the
anchors are completely inserted and flush with the wall.
5
Pencil Marks
6
1/2”
12