Victor 1280-7 - Manual (Page 11)

Using the Wireless Data Relay Device
The Victor 1280-7 has three different modes of operation when connected via the USB
device.
1. SEND TO PC MODE – Press this key to send the contents of the display to
the connected PC.
Example: User needs the total of the calculation 100 + 200 + 300 sent to
the computer. Enter 100 + 200 + 300 T into the calculator. Next press the
SEND TO PC key and the answer (600) will be sent to the computer.
2. KPAD MODE – In this mode, the calculator acts as a keypad for the
operator’s computer. As number keys are pressed the entry is instantly sent to
the computer’s display. The T (Total) key acts as an Enter key and the
Memory keys act as Arrow keys to move cell to cell in a spreadsheet.
3. PC / PAPERLESS TAPE MODE – In this mode the calculator will send the
information entered to a computer just as it would to the paper in a printer.
The number entered will appear in the first column and the operation
performed will appear in the second column.
(Fig. 9)
• The Wireless Data Relay device must be installed when using any of the three
PC Modes.
Wireless Data Relay (Fig. 10)
*Note: The Victor 1280-7 Wireless Calculator will not work with Apple
computers.