Victor 1280-7 - Manual (Page 6)

GT
Grand Total Mode: Any total created with the T key is automatically
accumulated to memory. The accumulated Grand Total can be recalled by
pressing the MT key.
A 0 2 3 F Kpad
A Monetary Add Mode: In this setting, amounts entered are assumed to be
monetary. The calculator automatically supplies a decimal point to the left of the
last two digits entered.
0 2 3 Fixed Digit Mode: These settings specify the number of digits to the right of the
decimal point that are shown in the result.
F
Floating Decimal Point Mode: This setting specifies that all digits of the result
are shown, up to a maximum of 12. If the result exceeds these capacities, excess
digits to the right of the decimal point are dropped. No rounding takes place.
Kpad Keypad Mode: In this mode, the calculator acts as a keypad for the operator’s
computer. As numbers keys are pressed the entry is instantly sent to the
computer’s display. The T (Total) key acts as an Enter key and the Memory keys
act as Arrow keys to move cell to cell in a spreadsheet.
• The Wireless Data Relay device must be installed into the computer’s USB
port when using any of the three PC Modes.
Key Functions
0 – 9, 00, . Numeric Keys: The calculator uses the conventional 10 – key indexing
keyboard, and includes the double zero and decimal point keys. Whole numbers are
entered exactly as they are written.
Paper Feed Key: Used to advance the paper.