Victor 1280-7 - Manual (Page 5)

P NP PC
P Print
Mode: The printer is activated as long as the calculator is turned on.
NP
Non Print Mode: The printer is activated only when the paper feed key or the
non-add / date key (#/S) is pressed. This is also called the display only mode.
PC
PC Mode: In this mode the calculator will send the information entered to a
computer just as it would to the paper in a printer. The number entered will
appear in the first column and the operation performed will appear in the second
column. This is also called the Paperless Tape Mode.
• The Wireless Data Relay device must be installed into the computer’s USB
port when using any of the three PC Modes.
Wireless Data Relay (Fig. 9)
▲ 5/4 ▼
▲
Round Up Mode: The ▲ setting causes an answer to a calculation to
automatically round up.
5/4
Split Rounding Mode: This setting causes automatic round off. If the first digit
of the answer beyond the decimal setting is 0 to 4, the value is rounded down.
Otherwise the value is rounded up.
▼
Round Down Mode: Causes calculations to automatically round down.
(Truncate)
Σ • GT
Σ
Sigma Mode : When the slide switch is in the Sigma position, the results of
multiplication or division calculations completed by the = or % keys are
automatically added to the accumulator. The accumulated answer can be recalled
by pressing the T key.
•
The calculator is in neither Sigma mode nor Grand Total mode.