Getting started, Connecting to a tv, Getting st ar ted – VTech Home Edutainment System User Manual
Page 8
NOTE: When the toy is not going to be in use for an extended period of
time, it is recommended to unplug the adaptor and remove the
adaptor from the
Main Unit.
Standard Guidelines for Adaptor Toys:
• Not for use by children under 3 years of age.
• Only use the recommended adaptor with the toy.
• The adaptor is not a toy.
• Never clean a plugged-in toy with liquid.
• Never use more than one adaptor.
• Do not leave the toy plugged-in for extended periods of time.
CONNECTING TO A TV
NOTE: Before you connect the V.FLASH
TM
to a TV, check to make sure that
the unit is working. Once you have turned the unit
ON, the power
indicator light (
ON button) should glow. If the ON button does not
glow, check to see that the adaptor is connected correctly. Make
sure that your TV and the unit are turned
OFF before you begin
making connections.
Connect the
V.FLASH
TM
to your TV or monitor by plugging the colored
cables on the unit into the matching color video and audio input jacks on
your TV set.
For TVs with stereo audio inputs:
- Connect the yellow plug on the
V.FLASH
TM
cable to
the yellow video input terminal on your TV.
- Connect the white and red plugs on the
V.FLASH
TM
cable to the white and red audio input terminals on
your TV.
For TVs with a mono audio input:
- Connect the yellow plug on the
V.FLASH
TM
cable to
the yellow video input terminal on your TV.
- Connect the white or red plug on the
V.FLASH
TM
cable
to the white or red audio input terminal on your TV.
GETTING ST
AR
TED
5
GETTING STARTED