VTech Home Edutainment System - Manual (Page 9)

CONNECTING TO A VCR
If there is no video IN and audio IN terminal on your TV set, you can connect
V.FLASH
TM to a VCR.
- Connect the yellow plug on the V.FLASH TM cable to
the yellow video input terminal on your VCR.
- Connect the white and red plugs on the V.FLASH TM
cable to the white and red audio input terminals on
your VCR.
CONNECTING THE V.FLASH
TM
CONTROLLER
Plug the controller into the PLAYER 1 port located on the front panel of
the Main Unit as illustrated.
GETTING ST
AR
TED
6
GETTING STARTED
CAUTION
For safety reasons, turn off the console and remove the power plug from the
electrical outlet before making or adjusting connections. When the power is ON,
please don’t insert or eject the V.FLASH TM controller, MEMORY CARD or other
accessories.