Vision Fitness T9550 - Manual (Page 2)

HARDWARE INCLUDED
5mm L-Shaped Wrench
Screwdriver
TOOLS, HARDWARE, & PARTS INCLUDED
PARTS BOX
Water Bottle, Qty: 1
Safety Magnet Key, Qty: 1
Color-coded Hardware Bags
8mm T-Shaped Wrench
ORANGE BAG PINK BAG
M8x20L Flat Head Bolt
Quantity: 8
5
STEP
Once the Treadmill is plugged in, you need to configure the T readmill and perfor m auto-calibration for maximum per formance.
PREMIER andDELUXE CONSOLE:
DO NOT STAND ON THE BEL T WHEN PERFORMING THE AUTO-CALIBRATION
Once the treadmill is plugged in, you will need to configure and run auto-calibration. With the safety key in place, turn the
treadmill on. A setup screen should appear on the console. Set your treadmill to the correct model number (9250 or 9550)
using the ELEVAT ION arrow keys and the correct units (MI [miles]/KM [kilometers]) using the SPEED arrow keys. If you are
unsure of the model number, you can locate the number on the console masts. Once you have located the model number and
units with the arrow keys, press and hold ENTER. Now you can perfor m auto-calibration by pressing ST ART.
The treadmill will run through minimum and maximum speed and elevation. This will take 3 to 5 minutes. Let the treadmill
perfor m this complete function. “END” will appear when auto-calibration is complete. When auto-calibration is complete, the
treadmill will reboot and return to the star t-up screen.
SIMPLE CONSOLE:
DO NOT STAND ON THE BEL T WHEN PERFORMING THE AUTO-CALIBRATION
Once the treadmill is plugged in, you will need to configure and run auto-calibration. With the safety key in place, turn the
treadmill on. A setup screen should appear on the console. The large LED window displays the model number and the small
LED window displays the units. Set your treadmill to the correct model number (9250 or 9550) using the ELEVATION arrow
keys and the correct units (0 for miles and 1 for kilometers) using the SPEED arrow keys. If you are unsure of the model
number, you can locate the number on the console masts. Once you have located the model number and units with the arrow
keys, press and hold ENTER. Now you can perfor m auto-calibration by pressing STAR T.
The treadmill will run through minimum and maximum speed and elevation. This will take 3 to 5 minutes. Let the treadmill
perfor m this complete function. “END” will appear in the window when auto-calibration is complete. When auto-calibration
is complete, the treadmill will reboot and return to the star t-up screen.
MODELCONFIGURA TION & AUTO-CALIBRATION
simple
reliable
customizable
500 South CP Avenue • P .O. Box 280 • Lake Mills, WI 53551
toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373
www.visionfitness.com
©2008 V ision Fitness. All Rights Reserved.
May be covered by one or mor e patents or patents pending:
US 6273843, US 7104930, TW 586429, CN 03206094.7
9.08
AG18.31PRD
REV8
5mm T-Shaped Wrench
GREEN BAG
8.2x15x1.5T
Arc Washer
Quantity: 4
M8x15L Button Head Bolt
Quantity: 4
8.2x15.4x2.0T
Lock Washer
Quantity: 3
M8x60L Button Head Bolt
Quantity: 3
M4x15L Flat Head
Pointed Screw
Quantity: 2
M4x15L Button Head Screw
Quantity: 6
8.2x15x2.0T
Flat Washer
Quantity: 3
5.3x14x1.0T Washer
Quantity: 4
M5x15L Flat Head Bolt
Quantity: 4
M5x15L Button Head Bolt
Quantity: 4
ASSEMBLY
GUIDE
T9250
AND
T9550
FOLDING TREADMILLS
BLUE BAG
8.2x15.4x2.0T
Lock Washer
Quantity: 8
8.2x15x1.5T
Arc Washer
Quantity: 4
M8x20L Button Head Bolt
Quantity: 4
8.2x15x1.4T
Flat Washer
Quantity: 8
M8x15L Flat Head Bolt
Quantity: 4
M8x15L Button Head Bolt
Quantity: 4
M4x15L Flat Head Bolt
Quantity: 4