2 quick setup, Table 3-1 . installation overview, Quick setup – Vidikron VL-57 User Manual
Page 26: Pre l iminar y
14
Vidikron VL-52 and VL-57 Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the DView installation process. The sections following this
one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, refer to
page...
1
Mount the DView on a wall (optional)
2
Connect signal sources to the DView
3
Connect external controller to RS-232 port (optional)
4
Apply power to the DView
5
Change the OSD language
6
If using the DView with a PC, adjust PC display properties
7
Display calibration: adjust the following for each input; save
settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position
Note