7 specifications, 1 dview specifications, Table 7-1 . dview specifications – Vidikron VL-57 User Manual
Page 69: Specifications, Dview specifications, Pre l iminar y
Vidikron VL-52 and VL-57 Owner’s Operating Manual
57
PRE
L
IMINAR
Y
7.1
DView Specifications
Table 7-1 lists the DView specifications.
7
Specifications
Table 7-1. DView Specifications
Native Resolution:
1920 x 1080
Screen Size:
VL-52 = 52 in. (diagonal)
VL-57 = 57 in. (diagonal)
Screen Aspect Ratio:
16:9
Available Aspect Ratios:
4:3, Letterbox, 16:9, IntelliWide™
DTV Compatibility:
480i/p, 576i/p, 720p, 1080i, 1080p
ISF Settings:
Yes
Contrast Ratio:
VL-52 = 2000:1
VL-57 = 1200:1
Data/Graphics Compatibility:
Refer to Table 7-2
Imagix Processing:
3:2 or 2:2 pull down
Inputs:
Multiple input combinations with up to
(4) Composite Video
(2) S-Video
(2) Component Video
(2) HDMI w/HDCP
(1) RGB (15-pin D-sub)
(1) RS-232 Control
(5) Analog Audio
(4 stereo RCA pairs + 3.5-mm stereo mini jack)
(1) RF Antenna (VL-52 only)
(1) CATV (75-ohm coaxial) (VL-52 only)
Outputs:
(1) Composite Video
(1) Analog Audio (stereo RCA pair)
(1) Stereo headphone (3.5-mm stereo mini jack)
(1) Digital Audio (S/PDIF, RCA coaxial)
(1) Digital Audio (TosLink optical)
Audio System:
10W RMS x 2 Stereo Amplifier
Tuner (VL-52 only):
NTSC/ATSC Stereo (PAL as monitor only), HDTV, PIP/PBP,
Parental Control (V-Chip), Closed Caption
Discrete IR Control:
Source, power and aspect ratios
Power Requirements:
100 to 240 VAC, 50/60Hz
Power Consumption:
VL-52 = 350 watts
VL-57 = 400 watts
Operating Environment:
40ºF to 95ºF (5ºC to 35ºC);
20% to 80% humidity (non-condensing)
Dimensions:
VL-52 = see Figure 7-1
VL-57 = see Figure 7-2