Table 4-1 . aspect ratio settings, V shift, H shift – Vidikron VP-42HD User Manual
Page 43: V size, Pre l iminar y
Vidikron PlasmaView Owner’s Operating Manual
33
PRE
L
IMINAR
Y
V Shift: Use the up- or down-arrow buttons (
,
) to highlight V Position. Then, use the
right-arrow button (
) to shift the image up; use the left-arrow button (
) to shift the
image down.
H Shift: Use the up- or down-arrow buttons (
,
) to highlight H Position. Then, use the
right-arrow button (
) to shift the image to the right; use the left-arrow button (
) to shift
the image to the left.
V Size: Use the up- or down-arrow buttons (
,
) to highlight V Size. Then, use the
right-arrow button (
) to increase the height; use the left-arrow button (
) to decrease it.
Table 4-1. Aspect Ratio Settings
Aspect Ratio
Description
Anamorphic
Select Anamorphic to view 16:9 DVDs and
HDTV programs in their native aspect
ratio. 4:3 images are stretched horizontally
to fit a 16:9 screen.
Standard
Standard 4:3 scales the input signal to fit
in the center of the 16:9 screen. 4:3 is the
aspect ratio used by computer monitors,
standard television programming and
most VHS video cassettes.
Letterbox
In Letterbox mode, the image is stretched
vertically; the top and bottom portions are
“blanked off.” Letterbox is best suited for
viewing LaserDisc movies or
non-anamorphic DVDs on a 4:3 screen.
IntelliWide
A 4:3 image is scaled NON-linearly (more
on the sides than in the center) to fit a
16x9 screen.
4:3 Image on
16:9 Screen
16:9 Image on
16:9 Screen
Active Image
Area (4:3)
Letterbox Image on
16:9 Screen