Vertek/XTC SCORPION 2330 - Manual (Page 34)

CONNECTIONS
Making Connections to the 2330
Except for USB flash drives, all connections to the 2330 should only be made
when the unit is disconnected from power.
Rear Panel Connections
VGA Monitor
Connect this to the main monitor.
USB
The primary use of the rear USB connector is for connecting the USB cable from a
3M touch screen.
Interface
This connector is used for the touch pad controller or, if using a touch screen, an
optional infrared receiver may be connected instead. There are 2 types of IR
receiver available; panel mount and surface mount.
Surface Mount IR Receiver Panel Mount IR Receiver
34 34
2330 - SCORPION OPERATOR MANUAL