VTech BS5872 - Manual (Page 23)

23
B
as
ic
O
pe
ra
tio
n
BASIC OPERATION
Ringer Volume
• From the idle (off) mode, press MENU/SELECT on the handset
(or MENU/SEL on the base) then the or key to RINGER
VOLUME.
• Press MENU/SELECT on the handset (or MENU/SEL on the base).
The current ringer volume will be shown:
• Press the or keys or enter a digit (0 through 6) to the desired
volume. The current ring tone is played. At the lowest setting, display
will show:
The handset or base will not ring when a call comes in if ringer volume
is set to the lowest setting.
• Press MENU/SELECT on the handset (or MENU/SEL on the base).
Ringer Tone
• From the idle (off) mode, press MENU/SELECT on the handset (or
MENU/SEL on the base) then the or keys to RINGER TONE.
• Press MENU/SELECT on the handset (or MENU/SEL on the
base).
• Press the or keys (or enter a digit 0 through 9) to sample the ring
tones. The screen will show:
• Press MENU/SELECT on the handset (or MENU/SEL on the
base).
Telephone Settings
• Settings for the
handset and
the base must
be programmed
separately. For
example, when
you set the ringer
volume for the
handset, it will not
automatically set
in the base.
> RINGER VOLUME
RINGER TONE
RINGER VOLUME
RINGER VOLUME
> RINGER TONE
KEY TONE
RINGER TONE
1