VTech BS5872 - Manual (Page 32)

32 BASIC OPERATION
Programming Password
You need to program a password to access your voicemail. First, you must activate and define your
voicemail password with the voicemail service provided by your local telephone company. Once you
have defined your password, you can then program it into the phone.
Use or to scroll to PASSWORD, then press MENU/SELECT on
the handset (or MENU/SEL on the base) to choose it. You see the
following display:
Use number keys to enter the password number provided by your local telephone company. To enter
pauses, press and hold PAUSE. Press DELETE/MUTE on the handset (or DELETE on the base)
to erase numbers if you make a mistake. When finished press MENU/SELECT on the handset (or
MENU/SEL on the base).
Programming the VOICEMAIL key
The default voicemail access number is *98. If this does not match the number provided by your local
telephone company, you will need to edit the number.
Use or to scroll to ACCESS NUMBER, then press MENU/SELECT
on the handset (or MENU/SEL on the base). You see the following
display:
Press
DELETE/MUTE on the handset (or DELETE on the base). Enter
the new voicemail access number provided by your local telephone
company. To enter pauses, press and hold PAUSE. When finished
press MENU/SELECT on the handset (or MENU/SEL on the base).
Programming the PLAY key
The default PLAY key number is 1. If this does not match the number
provided by your local telephone company, you will need to edit the
number.
Use or to scroll to PLAY, then press MENU/SELECT on the handset
(or MENU/SEL on the base). The display will show:
ACCESS NUMBER
*98_
PASSWORD
_
Voicemail
PLAY
1_