Vivotek VS2403 - Manual (Page 56)

- 55 -
www.vivotek.com
To set digital output 1 to connect NC with COMMON, type "do1=c".
To set digital output 2 to connect NO with COMMON, type "do2=o".
To set digital output 2 to connect NC with COMMON, type "do2=c".
Restore factory default settings
Typing "clear" will make Video Server restore factory settings but not restart. To validate
new settings, type "reset" to make the system restart.
Reset system
Typing "reset" will make Video Server perform a software reset.