Vivotek VS2403 - Manual (Page 74)

- 73 -
www.vivotek.com
Group: Image
NAME VALUE DESCRIPTION
brightness
(r/w) <-5 ~ 5> Adjust brightness of image according to
mode settings. <0>
saturation
(r/w) <-5 ~ 5> Adjust saturation of image according to
mode settings. <0>
contrast
(r/w) <-5 ~ 5> Adjust contrast of image according to
mode settings. <0>
hue
(r/w) <-5 ~ 5> Adjust hue of image according to mode
settings. <0>
Preview Apply the parameter of image but not save
Restore Restore the last saved image parameters
mode
(w)
Save Directly save the adjust image parameters
Group: Motion1~4
NAME VALUE DESCRIPTION
0 disable motion detection enabled
(r/w)
1 enable motion detection
0 disable motion window winenabled_<1~3>
(r/w)
1 enable motion window
winname_<1~3>
(r/w) <text string shorter
than 14 characters > name of motion window
<blank>
winleft_<1~3>
(r/w) 0 ~ 352 for CCD
0 ~ 320 for CMOS Left coordinate of window position.
<0>
wintop_<1~3>
(r/w) 0 ~ 288 for PAL
0 ~ 240 for
NTSC & CMOS Top coordinate of window position.
<0>
winwidth_<1~3>
(r/w) 0 ~ 352 for CCD
0 ~ 320 for CMOS Width of motion detection window.
<0>
winheight_<1~3>
(r/w) 0 ~ 288 for PAL
0 ~ 240 for
NTSC & CMOS Height of motion detection window.
<0>
winobjsize_<1~3>
(r/w) 0 ~ 100 Percent of motion detection window
<0>
winsensitivity_<1~3
>
(r/w) 0 ~ 100 Sensitivity of motion detection window
<0>