VIPowER VPM-62289 User Manual
Page 13
VPM-62289 USER MANUAL
13
Step2.
a) Place the HDD in the bottom enclosure cover. Align the HDD
mounting holes with the mounting holes on the bottom cover and
secure with four screws (through the bottom cover).
b) Attach the IDE 40-pin data cable from the rear panel of the
bottom cover to the 40-pin connector on the back of the HDD. To
ensure pin-1 to pin-1 connection, orient the cable so the colored
stripe edge is closest to the power connector.
c) Attach the 4-pin power cable from the rear panel of the bottom
cover to the 4-pin connector on the back of the HDD. The
connector is “D” shaped to ensure proper connection.
HDD
40-pin IDE Data
Connectors
4-pin Power
Connectors
4-pin Power Cable
on the rear panel
of the bottom cover
IDE 40-pin Data Cable
on the rear panel of
the bottom cover
Bottom cover
3.5” HDD
Mounting
Screws(x4)