VIPowER VPM-62289 - Manual (Page 9)

VPM-62289 USER MANUAL 9
Assembly with one 5.25-inch IDE device
Step1.
Remove the three retaining screws on the back of the external
enclosure. Separate the top and bottom enclosure covers.
1394 USB2.0
+5V
+12V GND
Top cover
Remove
Screws(x3)
Bottom cover
Separate
2-5 Installation
The following sections will guide you trough the installation of one
5.25” device or one 3.5” HDD assembled with the VPM-62289
enclosure. There are two parts to the installation:
1. Assembly with one 5.25-inch IDE device.
2. Assembly with one 3.5-inch HDD.
A small screwdriver is the only tool required.