VIPowER VPM-62289 - Manual (Page 18)

VPM-62289 USER MANUAL 18
Step 4:
Power ON your VPM-62289 External Enclosure. The LED
indicators on the external enclosure should light after a slight delay.
Step 5:
Plug the second USB connector end of the USB cable into a USB
port on your computer.
Or Plug the second FireWire Connector end of the FireWire cable
into a FireWire port on your computer.
The VPM-62289 external enclosure is ready to use.
Note:
This device will auto-detect the speed of your
USB port and adjust between USB 1.0 and USB
2.0 speed once the driver is installed.
VPM-62289 Connects to FireWire Port on computer
Plug into AC
Power Outlet
Power Adapter Power Cord
+5V/+12V
Power Adapter
FireWire
Cable
VPM-62289
Assembly with
5.25” Device
FireWire 6-pins to 4-pins
Converter Cable
Connect with one
end connector of
FireWire Cable Plug into FireWire
4-pins Port
on Notebook or
Computer
Plug into FireWire Port
on Computer
OR connect with the
6-pins connector of the
FireWire Converter
Cable