VXI EX7000 - Manual (Page 14)

VXI Technology, Inc.
14 EX7000 Series Introduction
EX7000 S PECIFICATIONS
G ENERAL S PECIFICATIONS
P HYSICAL D IMENSIONS
EX71HD 19” (48.2 cm) width x 24.25” (61.6 cm) depth* x 1.75” (4.5 cm) height
EX72SF 19” (48.2 cm) width x 24.25” (61.6 cm) depth* x 3.50” (8.9 cm) height
EX7400 19” (48.2 cm) width x 24.25” (61.6 cm) depth* x 7.0” (17.8 cm) height
* excludes coaxial connector protrusion from face of front and/or rear panels
C ONNECTORS
Host interface
Trigger bus
GP digital I/O
AC power RJ-45 (CAT 5e) Ethernet (10/100T)
Dual 25-pin mini D-sub
8 LVDS in/out, LXI Class A
9-pin D-sub
8 TTL I/O
IEC EN 60320 C13
R ESET
Momentary push-button LAN reset, available through rear panel access hole
P OWER
Voltage 90 V ac - 264 V ac, 47 Hz - 63 Hz
Power 110 VA Max (EX71HD), 20 VA Max (EX72SF)
D IGITAL C ONTROLLER B OARD (DCB)
P ROCESSOR MCF5272
SDRAM
Flash ROM
Single-command response time 32 MB
8 MB
< 3 ms
R ELAY D RIVER B OARD (RDB)
R ELAY P OWER
+5 V to +48 V
*Three power pins, each connected to four relay driver connections
R ELAY D RIVERS
72 open-drain high-current sink on a standard board. Options available to replace some or
all of the open drain outputs with TTL drivers. Expandable to 576. Twelve open-drain
very high-current sink drivers for reset. Arranged as one drive line per relay driver
connector as well as 12 lines together on one connector on J21.
M AXIMUM C URRENT S INK
200 mA (all channels ON) for 72 channels
410 mA (individual channels) for 72 channels
800 mA for 12 reset lines
TTL I/O
32 channels per board, expandable to 256
M ODULE ID
Rotary switch (0 through 7 identifies driver board in chain)
S OFTWARE
P ROGRAMMATIC C ONTROL
IVI-COM and IVI-C API
IVI similar API for Linux
DOS-based interactive command set
I NTERACTIVE C ONTROL
Embedded JAVA applet
C ONFIGURATION T ABLE
128 elements (power-on, last known, user-defined)
S CAN L IST
16k set-ups