Conference calls – VTech A700 User Manual
Page 35
• Incoming calls:*
• All – prevents all incoming calls,
• When roaming – prevents all incoming calls
when you are not registered with your home
network (i.e. when roaming),
• Status check – determines any current settings.
6
e to choose the required option, then c to
confirm and
c to activate,
• Confirmation of the new setting will be received
from your network.
Conference calls
Conference calls allow more than two people to talk in a
common connection. You need two separate calls to begin
a conference, these can both be outgoing, incoming, or a
mixture of both.
To start a conference call:
1 Make, or answer your first call in the usual manner,
2
) to place the call on hold,
3 Make, or answer an additional call in the usual
manner,
4
c to access the menu and choose Join.*
Repeat steps 3 and 4 for each person joining the
conference call, up to a maximum of five people in total.*
To manage a conference call:*
1 During the conference call,
c to access the
conference call,
2
c to display conference call participants,
3
e to select one of the callers,
4
c to show conference options available for selected
caller:
•
to hang up this call -
e to select Disconnect,
•
to separate a call away from the conference -
e
to select Split,
•
to switch between the separated call and the
conference -
)or e to select Swap,*
•
to end the separated call -
( (when connected
to the separated call),
•
to end the conference -
( (when connected to
the conference),
•
to return to held caller after ending the separated
call -
e to select Retrieve. *
*Network dependant (service may not be available)
35
Special features