VTech A700 - Manual (Page 9)

• Key tones – sets the sound played when a key is
pressed.
Vibration alert
Use the vibration alert when you need to receive calls
without disturbing others, i.e. during meetings.
1 From standby,
c to enter the menu,
2
e to select Settings, c to enter,
3
e to select Vibration, c to enter,
4
e to set vibration mode ON (or OFF), c to apply.
•
is displayed when vibration mode is selected.
Auto key lock
This feature automatically locks the keypad until you either
receive a call, or press and hold
#. The keypad is
locked again after the incoming call ends, or after inactivity.
The
symbol is displayed when the keypad is locked.
To set:
1 From standby,
c to enter the menu,
2
e to select Settings, c to enter,
3
e to select Auto key lock, c to enter,
4
e to select ON (or OFF), c to apply.
Once set, press and hold
# to unlock the keypad.
Manual key lock
You can manually lock and unlock the keypad at any time.
• Press and hold
# to manually lock/unlock the keypad.
Hot keys
The hot key function allows you to quickly access a
regularly used feature by pressing and holding just one
key. Use the Hot Keys menu option to assign your chosen
phone functions to the keys
2 to
.
To set Hot keys:
Shortcut for keys that have not yet been assigned: Press
and hold the required key (
2 to
) until the display
shows ‘Not programmed’. When the display then shows
‘Program hot key?’
c or press ) to confirm. Now go
to step 4 below.
1 From standby,
c to enter the menu,
2
e to select Settings, then Hot keys. The display will
show Key 2 and the current setting for that key,
3
e to select the required key (2 to 9) and c to
accept. A list of phone functions will be displayed,
4
e to select the required phone function and c to
apply that function to the key.
9 Getting started and everyday use