Adjusting the projector angle, 3 rotate the rear foot adjuster to align the image, Figure 5: angle adjustment – VIEWSONIC PJ700 User Manual
Page 10: Figure: 5 angle adjustment
Advertising

ViewSonic PJ700
7
E
N
G
L
I
S
H
Adjusting the Projector Angle
Adjust the projector angle using the foot adjusters shown in Figure 5 below. See also Keystone under
“Image Menu” on page 11.
1
Press the release button to lower the front foot, then tilt the projector up as shown in Figure 5
below.
•
The front foot adjusts the vertical height of the projected image.
2
Release the button to lock the front foot in place.
3
Rotate the rear foot adjuster to align the image.
•
The rear foot adjusts the horizontal alignment of the projected image.
Figure 5: Angle Adjustment
Rotate the rear
foot adjuster
Press the release button
to lower the front foot adjuster
Front foot adjuster
Advertising