Nvr installation, Synchronizing the portal server and the nvr, Nvr configuration – VBrick Systems Portal Server ETV v4.2.1 User Manual

Page 124: Configuring a standard nvr, 112 nvr configuration

Advertising
background image

112

© 2008 VBrick Systems, Inc.

has an API interface that lets you write custom applications to control the NVR.

NVR Installation

See the NVR Release Notes for complete installation instructions.

Synchronizing the Portal Server and the NVR

The internal clocks on the Portal Server and the NVR must be synchronized for recording
functionality to work properly. You can use the

Net time

command as explained below or you

can use an external time server. In order to run the

Net time

command on either server, the

server must be on the domain, and the user logged onto the server must have admin
privileges and be part of the domain.

T

To synchronize the Portal Server and the NVR:

1. Open a command prompt window on the Windows 2003 Server Portal Server machine.
2. Type:

Net time \\{NVR IP Address} /SET

NVR Configuration

Configuring a Standard NVR

A standard NVR is installed on a dedicated machine that comes fully loaded with all NVR
software. However, you must still configure the NVR as explained below. NVR configuration
is performed using the Recorders pages on the Portal Server's or Standalone NVR’s Admin
Console. See Recorders on page 43 for more information.

T

To configure a standard NVR in a Portal Server Installation:

1. Login to the Portal Server Admin Console using the host name or IP address of the Portal

Server machine. For example:

http://myserveraddress/admin

2. Define a Record server.

a. Set record

Path

if necessary. Set to local hard drive on NVR or to a network drive.

b. Set

Max. Recording

.

3. Define VOD and FTP Servers (go to

Global Settings > Servers

).

a. Record only – VOD server not required.
b. Record and ingest – must define a VOD server.
c. Record, ingest, and FTP – must define VOD and FTP servers.
d. Record and FTP – must define an FTP server.

4. If Access Control is enabled, you must create a user and grant the following permissions
on the

Users

page in the Admin Console. See Configuring Users on page 93 for more

information.

a.

Add/Modify Live Channel Privileges

b.

Allow Access To Specific FTP Servers

c.

Allow Access To Specific Recorder Servers

d.

Allow Access To Specific VOD Servers

Note When purchasing additional NVRs, VBrick provides a single combined license that

includes recording capacity for all NVRs onsite (Standard and/or Standalone).

Advertising